CXGPS Command - GPS Update Mode
Configures the mode in which position, speed, heading, etc. data obtained from the internal GPS module will be updated.
What is it for?
| Use case | Description |
|---|---|
| 📍 Stable position | Avoid GPS drift when stationary |
| ⚡ Power saving | Reduce GPS processing with IGN OFF |
| 🚗 Parked vehicles | Maintain last valid position |
| 📊 Report accuracy | Filter GPS noise at low speed |
Commands
Configure
SCXGPSaQuery
QCXGPSResponse
RCXGPSaParameters
| Value | Description |
|---|---|
| 0 | Updates position internally every 1 second without condition (default) |
| 1 | Updates position internally every 1 second conditioned to IGN ON. If IGN is disconnected, shows last valid position |
| 2 | Updates position if speed is above 5km/h with 5 seconds guard (debouncing 5 sec) |
Examples
Mode conditioned to IGN ON
>SCXGPS1<Sets the update mode conditioned to IGN ON.
This mode is extremely useful when you want to display the same geographic coordinates when the vehicle is stopped.
Compatibility
💾Firmware:v1.00.00
SPLegacy
ULLegacy
MTLegacy
C3Legacy
C5Legacy
SP-IOT
SM-IOT
ZE-IOT
Last updated