🌡️ Digital Temperature Sensor
1-Wire temperature sensor connection guide for Spider IoT.
📋 Description
This accessory is widely required in applications where cold chain control of a product being transported is needed.
Rinho incorporates the DS18B20 digital temperature sensor from Dallas, avoiding failures and calibration processes of analog sensors.
🔧 Technical Specifications
| Feature | Value |
|---|---|
| Model | DS18B20 (Dallas) |
| Protocol | 1-Wire (One Wire) |
| Accuracy | ±0.5°C |
| Range | -55°C to +125°C |
| Resolution | 9 to 12 bits |
| Max. bus distance | 15 meters |
🔌 Connection
The DS18B20 supports parasitic mode (only 2 wires). Connect to the 1-Wire pin:
| DS18B20 Sensor | Spider IoT | Pin | Color |
|---|---|---|---|
| DATA (Yellow) | OW | 4 | Purple |
| GND (Black) | GND | 7 | Black |
💡
Parasitic mode: The sensor is powered directly from the DATA line, no separate VCC cable required.
⚠️ Installation Notes
| Aspect | Recommendation |
|---|---|
| Cable | Shielded (shield + 2 conductors) |
| Maximum distance | 15 meters |
| Multiple connection | In daisy chain |
| Protection | Avoid direct exposure to moisture |
📡 Related Commands
| Command | Function |
|---|---|
| DT | Read temperature value |
| DT IoT | Read multiple sensors (IoT) |
| AR | Create temperature trigger thresholds |
📊 Compatible Reports
Temperature value can be included in these report formats:
| Report | Description |
|---|---|
| IB | Applied report with temperature |
| CR | Extended report with temperature |
See Also
- Accessory Connectors - 1-Wire port diagram
- iButton Keys - Another 1-Wire accessory
- Hardware - Hardware configuration
Last updated