Web configurator
The web configurator reads, edits and uploads the complete configuration of a Rinho device from the browser, using forms instead of commands. It works with Zero IoT, Spider IoT and Smart IoT.
It is free and needs no software installation. To connect to the device you need Chrome, Edge or Opera, the CP210x driver (Downloads) and a USB data cable.
What it does
- Reads the configuration of the connected device and shows it by section: general, GPS, inputs, outputs, communications, modules and rules.
- Edits with forms: each field explains what it does and which values it accepts.
- Validates before sending: the configurator flags errors and warns when a feature needs a newer firmware than the one on the device.
- Uploads the configuration over USB, straight from the browser.
- Shows live status: satellites, cellular signal, ignition, voltage, inputs and outputs.
- Updates the firmware by cable, from the Firmware section.
Working modes
| Mode | For | What it allows |
|---|---|---|
| Basic | Installers | Guided modules: periodic reports, driving, speed, battery, parking and custom rules |
| Advanced | Technicians who know the event engine | Every module and every rule editable |
| Code | People who work with scripts | The full script as text: paste, edit and import it again |
Code mode accepts the same commands sent through a terminal (>SVL00E01101<, for example) and
interprets them exactly like the rest of the configurator.
Built-in assistant
The configurator includes an AI assistant that builds the configuration from a plain-language request (“sound the buzzer above 110 km/h”), explains an existing configuration and points out what is missing for it to work. Every proposal goes through the same validation and is applied only when the user accepts it.
The assistant is available to customers with access enabled. You can request it through the contact form .
Other ways to work with the device
| Tool | Best for |
|---|---|
| Web configurator | Configuring with forms and validation |
| Web Serial | Sending single commands and reading the device replies |
| AI skills | Configuring and troubleshooting from Claude Code, Codex, Cursor or another AI agent |
More information at rinho.com.ar/en/configurator .